Text of forums.developer.nvidia.com › t › opencv-build-script › 74015 as Styx crawled it on Nov 19, 2026. The page may have changed since. Only its words are kept, without pictures or layout, and only the first part of a long page.

Open the live page

OpenCV build script - Jetson Nano - NVIDIA Developer Forums

OpenCV build script Robotics & Edge Computing Jetson Systems Jetson Nano opencv mdegans May 1, 2019, 6:49pm 1 Contiued from from another thread : I’ve created a github repo for an OpenCV build script. The script installs build dependencies, clones a requested version of OpenCV, builds it from source, and installs it. On a Nano itself it will likely take quite a while to run, and a large swapfile is recommended or you are likely to run out of memory during the build.

Please not that this script is currently untested and expected to break . Reporting issues here or on github is very much appreciated. Using cv::cuda in DeepStream gst-dsexample SB_97 November 4, 2019, 10:39am 2 I just wanted to flag up that I’ve started a related topic (about Tegra optimization in OpenCV) here: [url] https://devtalk.nvidia.com/default/topic/1065966/jetson-nano/is-opencv-in-jetpack-4-2-1-optimized-for-tegra-/post/5398076/#5398076[/url] .

SB_97 November 7, 2019, 8:47am 10 mdegans - Thanks very much for providing this - it’s really helpful. I ran into a minor issue at the end where I got the following: “Do you wish to remove temporary build files in /tmp/build_opencv ? (Doing so may make running tests on the build later impossible) Y/N y ./build_opencv.sh: error reading input file: Stale file handle” I looked in the tmp folder and there was no build_opencv folder there.

Also - it would be good to document the ‘test’ option in the README. Thanks again! mdegans November 7, 2019, 4:50pm 11 Hmm. Based on your paste it looks like you selected ‘y’ to delete the files, in which case it’s normal that there be nothing in /tmp/build_opencv The stale file handle error seems to be because the script deletes /tmp/build_opencv while still inside /tmp/build_opencv. My cleanup function should cd out first.

Thanks for finding that. Documenting the test option is a good idea. I included it for the sorts of people who read the script, as normally they can take a very very long time to run. I will update the script soon, fixing the bug you found and documenting the test option as suggested. I will probably add a warning that tests can take a very long time to run. consultorsmartcities November 8, 2019, 7:36pm 12 Thanks !!. Use Python 3.6.8 I run an application with OpenCV and the following error comes up: ERROR: A version that meets the opencv_contrib_python requirement (versions: none) could not be found ERROR: A matching distribution for opencv_contrib_python was not found.

Help me! mdegans November 8, 2019, 7:41pm 13 Sure thing. It looks like opencv_contrib wasn’t built and installed. Did you use my script to install OpenCV? consultorsmartcities November 9, 2019, 2:16am 14 Of course I use it !! install version 4.1 mdegans November 9, 2019, 11:15pm 15 Just checking. I will see on Monday if I can replicate. Is there anything special you can tell me about your installation or configuration?

Did you try building with X turned off (sudo systemctl isolate multi-user.target). Did you try with a swap file enabled ? consultorsmartcities November 10, 2019, 2:55am 16 Ya esta trabajano, Muchas gracias. SB_97 November 11, 2019, 2:08pm 17 Great! :-) Thanks very much for looking into that. Robert97 March 30, 2020, 10:57am 18 Hi I am going to be using C++ for my jetson project and as such don’t believe I will need python.

Can I just remove the lines where you apt install python and then set the cmake flags to off or will this break the script? Thanks mdegans March 30, 2020, 3:07pm 19 Hi, @Robert97 You can absolutely do that and it shouldn’t break the script. Robert97 April 1, 2020, 4:23pm 20 Sorry to bother again. I did as I mentioned above where I commented out the lines that install python and I set the python cmake flags to off. Opencv built however when I checked the version it had installed 4.1.1 and with no Cuda.

I check the script to ensure that the Cuda flag was set to on and it was. Any idea what could have caused this? Also is there a log file I can find. I didn’t remove the temporary build files. Thanks mdegans April 1, 2020, 6:31pm 21 No bother. Happy to have the bug reports. Can you post a copy of the script? Regarding the log file, I don’t think there is one, but that’s a good suggestion and I just added it to the dev branch of the script.

From the nano_build_opencv folder you cloned, can you run git checkout dev git pull and rerun the build? There should then be four logs written to /tmp/build_opencv/opencv/build as each of the build steps progress: configure.log , build.log , test.log , and install.log . However, the most likely cause of failure while building OpenCV is that your device runs out of memory. I recommend that you either turn off x11 temporarily with sudo systemctl isolate multi-user.target , or add a larger swap file – preferably both for the fastest build – and preferably the swap on an external disk, both for speed and to reduce wear on your sd card.

To install a swap file, fallocate a file an an external disks and roughly follow these commands here . It’s probably not desirable to add it to fstab, so you can skip that part and delete the file after you’re done and turn swap back off. Robert97 April 2, 2020, 12:13pm 22 Hi. Thanks for the advice. See below the script that I ran. #!/usr/bin/env bash # 2019 Michael de Gans set -e # change default constants here: readonly PREFIX=/usr/local # install prefix, (can be ~/.local for a user install) readonly DEFAULT_VERSION=4.2.0 # controls the default version (gets reset by the first argument) readonly CPUS=$(nproc) # controls the number of jobs # better board detection. if it has 6 or more cpus, it probably has a ton of ram too if [[ $CPUS -gt 5 ]]; then # something with a ton of ram JOBS=$CPUS else JOBS=4 # you can set this to 4 if you have a swap file # otherwise a Nano will choke towards the end of the build fi cleanup () { # https://stackoverflow.com/questions/226703/how-do-i-prompt-for-yes-no-cancel-input-in-a-linux-shell-script while true ; do echo "Do you wish to remove temporary build files in /tmp/build_opencv ?

" if ! [[ "$1" -eq "--test-warning" ]] ; then echo "(Doing so may make running tests on the build later impossible)" fi read -p "Y/N " yn case ${yn} in [Yy]* ) rm -rf /tmp/build_opencv ; break;; [Nn]* ) exit ;; * ) echo "Please answer yes or no." ;; esac done } setup () { cd /tmp if [[ -d "build_opencv" ]] ; then echo "It appears an existing build exists in /tmp/build_opencv" cleanup fi mkdir build_opencv cd build_opencv } git_source () { echo "Getting version '$1' of OpenCV" git clone --branch "$1" https://github.com/opencv/opencv.git git clone --branch "$1" https://github.com/opencv/opencv_contrib.git } install_dependencies () { # open-cv has a lot of dependencies, but most can be found in the default # package repository or should already be installed (eg.

CUDA). echo "Installing build dependencies." sudo apt-get update sudo apt-get dist-upgrade -y --autoremove sudo apt-get install -y \ build-essential \ cmake \ git \ gfortran \ libatlas-base-dev \ libavcodec-dev \ libavformat-dev \ libavresample-dev \ libcanberra-gtk3-module \ libdc1394-22-dev \ libeigen3-dev \ libglew-dev \ libgstreamer-plugins-base1.0-dev \ libgstreamer-plugins-good1.0-dev \ libgstreamer1.0-dev \ libgtk-3-dev \ libjpeg-dev \ libjpeg8-dev \ libjpeg-turbo8-dev \ liblapack-dev \ liblapacke-dev \ libopenblas-dev \ libpng-dev \ libpostproc-dev \ libswscale-dev \ libtbb-dev \ libtbb2 \ libtesseract-dev \ libtiff-dev \ libv4l-dev \ libxine2-dev \ libxvidcore-dev \ libx264-dev \ pkg-config \ qv4l2 \ v4l-utils \ v4l2ucp \ zlib1g-dev #python-dev \ #python-numpy \ #python3-dev \ #python3-numpy \ #python3-matplotlib \ } configure () { local CMAKEFLAGS=" -D BUILD_EXAMPLES=OFF -D BUILD_opencv_python2=OFF -D BUILD_opencv_python3=OFF -D CMAKE_INSTALL_PREFIX=${PREFIX} -D CMAKE_BUILD_TYPE=RELEASE -D CUDA_ARCH_BIN=5.3,6.2,7.2 -D CUDA_ARCH_PTX= -D CUDA_FAST_MATH=ON -D EIGEN_INCLUDE_PATH=/usr/include/eigen3 -D ENABLE_NEON=

The rest of this page is on the live site.