Text of docs.python.org › id › 3 › library › timeit.html as Styx crawled it on Nov 19, 2026. The page may have changed since. Only its words are kept, without pictures or layout, and only the first part of a long page.

Open the live page

timeit --- Measure execution time of small code snippets — Dokumentasi Python 3.15.2

Navigasi index modul | berikut | sebelum | Python » 3.15.2 documentation » The Python standard library » Debugging and profiling » timeit --- Measure execution time of small code snippets | Tema | timeit --- Measure execution time of small code snippets ¶ Source code: Lib/timeit.py This module provides a simple way to time small bits of Python code. It has both a Command-line interface as well as a callable one. It avoids a number of common traps for measuring execution times.

See also Tim Peters' introduction to the "Algorithms" chapter in the second edition of Python Cookbook , published by O'Reilly. Basic examples ¶ The following example shows how the Command-line interface can be used to compare three different expressions: $ python -m timeit "'-'.join(str(n) for n in range(100))" 10000 loops, best of 5: 30.2 usec per loop $ python -m timeit "'-'.join([str(n) for n in range(100)])" 10000 loops, best of 5: 27.5 usec per loop $ python -m timeit "'-'.join(map(str, range(100)))" 10000 loops, best of 5: 23.2 usec per loop This can be achieved from the Python interface with: >>> import timeit >>> timeit . timeit ( '"-".join(str(n) for n in range(100))' , number = 10000 ) 0.3018611848820001 >>> timeit . timeit ( '"-".join([str(n) for n in range(100)])' , number = 10000 ) 0.2727368790656328 >>> timeit . timeit ( '"-".join(map(str, range(100)))' , number = 10000 ) 0.23702679807320237 A callable can also be passed from the Python interface : >>> timeit . timeit ( lambda : "-" . join ( map ( str , range ( 100 ))), number = 10000 ) 0.19665591977536678 Note however that timeit() will automatically determine the number of repetitions only when the command-line interface is used.

In the Contoh-contoh section you can find more advanced examples. Python interface ¶ The module defines three convenience functions and a public class: timeit. timeit ( stmt = 'pass' , setup = 'pass' , timer = <default timer> , number = 1000000 , globals = None ) ¶ Create a Timer instance with the given statement, setup code and timer function and run its timeit() method with number executions. The optional globals argument specifies a namespace in which to execute the code.

Berubah pada versi 3.5: The optional globals parameter was added. timeit. repeat ( stmt = 'pass' , setup = 'pass' , timer = <default timer> , repeat = 5 , number = 1000000 , globals = None ) ¶ Create a Timer instance with the given statement, setup code and timer function and run its repeat() method with the given repeat count and number executions. The optional globals argument specifies a namespace in which to execute the code.

Berubah pada versi 3.5: The optional globals parameter was added. Berubah pada versi 3.7: Default value of repeat changed from 3 to 5. timeit. default_timer ( ) ¶ The default timer, which is always time.perf_counter(), returns float seconds. An alternative, time.perf_counter_ns, returns integer nanoseconds. Berubah pada versi 3.3: time.perf_counter() is now the default timer. class timeit. Timer ( stmt = 'pass' , setup = 'pass' , timer = <timer function> , globals = None ) ¶ Class for timing execution speed of small code snippets.

The constructor takes a statement to be timed, an additional statement used for setup, and a timer function. Both statements default to 'pass' ; the timer function is platform-dependent (see the module doc string). stmt and setup may also contain multiple statements separated by ; or newlines, as long as they don't contain multi-line string literals. The statement will by default be executed within timeit's namespace; this behavior can be controlled by passing a namespace to globals .

To measure the execution time of the first statement, use the timeit() method. The repeat() and autorange() methods are convenience methods to call timeit() multiple times. The execution time of setup is excluded from the overall timed execution run. The stmt and setup parameters can also take objects that are callable without arguments. This will embed calls to them in a timer function that will then be executed by timeit() .

Note that the timing overhead is a little larger in this case because of the extra function calls. Berubah pada versi 3.5: The optional globals parameter was added. timeit ( number = 1000000 ) ¶ Time number executions of the main statement. This executes the setup statement once, and then returns the time it takes to execute the main statement a number of times. The default timer returns seconds as a float. The argument is the number of times through the loop, defaulting to one million.

The main statement, the setup statement and the timer function to be used are passed to the constructor. Catatan By default, timeit() temporarily turns off garbage collection during the timing. The advantage of this approach is that it makes independent timings more comparable. The disadvantage is that GC may be an important component of the performance of the function being measured. If so, GC can be re-enabled as the first statement in the setup string.

For example: timeit . Timer ( 'for i in range(10): oct(i)' , 'gc.enable()' ) . timeit () autorange ( callback = None , target_time = None ) ¶ Automatically determine how many times to call timeit() . This is a convenience function that calls timeit() repeatedly so that the total time >= target_time seconds, returning the eventual (number of loops, time taken for that number of loops). It calls timeit() with increasing numbers from the sequence 1, 2, 5, 10, 20, 50, ... until the time taken is at least target_time seconds.

If callback is given and is not None , it will be called after each trial with two arguments: callback(number, time_taken) . Added in version 3.6. Berubah pada versi 3.15: The optional target_time parameter was added. repeat ( repeat = 5 , number = 1000000 ) ¶ Call timeit() a few times. This is a convenience function that calls the timeit() repeatedly, returning a list of results. The first argument specifies how many times to call timeit() .

The second argument specifies the number argument for timeit() . Catatan It's tempting to calculate mean and standard deviation from the result vector and report these. However, this is not very useful. In a typical case, the lowest value gives a lower bound for how fast your machine can run the given code snippet; higher values in the result vector are typically not caused by variability in Python's speed, but by other processes interfering with your timing accuracy.

So the min() of the result is probably the only number you should be interested in. After that, you should look at the entire vector and apply common sense rather than statistics. Berubah pada versi 3.7: Default value of repeat changed from 3 to 5. print_exc ( file = None ) ¶ Helper to print a traceback from the timed code. Typical use: t = Timer ( ... ) # outside the try/except try : t . timeit ( ... ) # or t.repeat(...) except Exception : t . print_exc () The advantage over the standard traceback is that source lines in the compiled template will be displayed.

The optional file argument directs where the traceback is sent; it defaults to sys.stderr . Command-line interface ¶ When called as a program from the command line, the following form is used: python - m timeit [ - n N ] [ - r N ] [ - u U ] [ - s S ] [ - p ] [ - v ] [ - h ] [ statement ... ] Where the following options are understood: -n N , --number =N ¶ how many times to execute 'statement' -r N , --repeat =N ¶ how many times to repeat the timer (default 5) -s S , --setup =S ¶ statement to be executed once initially (default pass ) -p , --process ¶ measure process time, not wallclock time, using time.process_time() instead of time.perf_counter() , which is the default Added in version 3.3. -u , --unit =U ¶ specify a time unit for timer output; can select nsec , usec , msec , or sec Added in version 3.5. -t , --target-time =T ¶ if --number is 0, the code will run until it takes at least this many seconds (default: 0.2) Added

The rest of this page is on the live site.